HANNA Instruments Logo
SKU HI739 Kategorija

Fluoride Checker® (High Range) HC - HI739

Vse cene so brez DDV in brez stroškov dostave, razen če ni to kako drugače določeno.

The Hanna Fluoride High Range Checker® bridges the gap between simple chemical test kits and professional instrumentation. Chemical test kits have limited accuracy and resolution since they rely upon the human eye to discern differences in color. Professional instrumentation incorporates a light source such as an LED or tungsten lamp with a filter and a light sensing detector to precisely determine ion concentration. Professional instrumentation offers greater resolution and accuracy but can cost hundreds of dollars. The Hanna Fluoride High Range Checker® uses a fixed wavelength LED and silicon photo detector to provide the accuracy of professional instrumentation at the affordable price of a chemical test kit.

Kupujte z zaupanjem


7 na zalogi

Povprašajte za ponudbo

Izdelka ni mogoče kupiti prek spleta (on-line). Izpolnite obrazec, da prejmete ponudbo. Hvala Vam.


The HI739 Checker® HC (Handheld Colorimeter) provides a simple, accurate and cost-effective way to measure fluoride.

Fluoride is one of the very few chemicals that have been shown to cause significant effects in people through drinking water. Fluoride has beneficial effects on teeth at low concentrations in drinking water, but excessive exposure to fluoride in drinking water, or in combination with exposure to fluoride from other sources, can give rise to a number of adverse effects.

Water fluoridation is the controlled addition of fluoride to a public water supply to reduce tooth decay. Fluoridated water operates on tooth surfaces: in the mouth, it creates low levels of fluoride in saliva, which reduces the rate at which tooth enamel demineralizes and increases the rate at which it remineralizes in the early stages of cavities. A 1994 World Health Organization expert committee suggested a level of fluoride from 0.5 to 1.0 mg/L, depending on climate. Bottled water typically has unknown fluoride levels, and some domestic water filters remove some or all fluoride.

Designed as a more accurate alternative to chemical test kits, the HI739 provides quick, accurate results in four easy steps:

* To zero, mix 2 ml of Reagent A and 8 ml of Reagent B; gently invert 5 times, and wait 1 minute before inserting in the meter and pressing the button.




0.0 to 20.0 ppm


0.1 ppm


±0.5 ppm ± 5% of reading


adaptation of the Standard Methods for the Examination of Water and Wastewater, 18th edition, SPADNS method.

Additional Specifications

Battery Type

1.5V AAA / 10,000 hours of continuous use


0 to 50°C (32 to 122°F); RH max 95% non-condensing


after ten minutes of non-use

Photometer/Colorimeter Light Source

LED @ 610 nm

Photometer/Colorimeter Light Detector

silicon photocell


154 x 63 x 30 mm (6.1 x 2.5 x 1.2”)


196 g (6.91 oz.)

Ordering information

HI739 Checker® is supplied with (2) sample cuvettes with caps, fluoride HR reagent starter kit for 15 tests (1 bottle of fluoride HR reagent A, 1 bottle of fluoride HR reagent B), (2) 1 mL syringe with tip, pipette, battery, and instructions.

Dodatne informacije

Dodatne informacije

Poseben parameter


, ,

Povprašajte za ponudbo

Opomba: polja, označena z *, so obvezna.

Ne najdete tistega, kar potrebujete?

V našem katalogu imamo več kot 3.000 izdelkov. Registrirajte se zdaj in prenesite katalog ali pa nas kontaktirajte, skušali Vam bomo pomagati.


Login to your account or create one right now to access to our exclusive content.


Prijavite se prek svojega računa ali pa ga sedaj na novo ustvarite prek naših prvovrstnih vsebin.