Digital Refractometer for Measurement of Sugar in Wine HI96813

The HI96813 Digital Wine Refractometer converts the refractive index of the sample to sucrose concentration in units of percent by weight, % Brix (also referred to as °Brix). The conversion used is based on the ICUMSA Methods Book (International Commission for Uniform Methods of Sugar Analysis). Since the majority of sugar in grape juice is fructose and glucose and not sucrose, the reading is sometimes referred to as “Apparent Brix”.

The HI 96813 allows the user to tailor the instrument to their specific needs based on their experience since no fixed conversion factor is universally applicable. The first conversion is based on the % Brix value and an adjustable conversion factor between 0.50 and 0.70 (0.55 is a common value).

Potential alcohol (%V/V) = (0.50 to 0.70) x % Brix

One drawback of the above equation is that it does not take into account the non-fermentable sugars and extract. A second equation is also available that takes these factors into account and can give a more accurate estimate of the alcohol content in the finished wine. This conversion is named “C1” on the meter, and uses the following equation:

Potential Alcohol (%V/V) = 0.059 x [(2.66 x °Oe) - 30] (C1)
* 1°Oe is roughly equal 0.2% Brix

The HI96813 is an easy to use tool for winemakers for measuring sugar and potential alcohol in grapes or must, in the field or in the lab.

• Designed for wine sugar and potential alcohol analysis
• Temperature Compensation algorithms based on sucrose solution
• 0 to 50 % Brix range with an accuracy of ± 0.2% Brix
• 0-25 % potential alcohol range with an accuracy of ± 0.2% potential alcohol

Making a Standard % Brix (Sucrose) Solution

To make a Brix Solution, follow the procedure below:

• Place container (such as a glass vial or dropper bottle that has a cover) on an analytical balance.
• Tare the balance.
• Weigh out X grams of high purity sucrose (CAS #: 57-50-1) directly into a beaker.
• Add distilled or deionized water to the beaker so the total weight of the solution is 100g.
• Note: Solutions above 65% may need to be vigorously stirred or shaken and heated in a water bath to roughly 40°C (104°F).
• Remove solution when sucrose has dissolved and allow to cool before use.

Example to prepare as 25% sucrose solution: